|
|
 |
Capture
- IT
- J1708 / OBDII /
CAN interfaces allow the user to capture, store
and time stamp all fault codes, MIDs and PIDs
desired.
- Digital Inputs
log and time stamp sensors from doors, seatbelts,
emergency switches, parking brake etc.
- Digital Outputs
can control alarms, lamps, triggers etc.
- 3 Axis
Accelerometer can sense if an accident occurrs
to automatically send a message to dispatch.
It records the maximum G-force and vector every
second
- Wheel Ticks or
Transmission Pulses can be used in instances
where odometer matching is required.
- Voltage
Monitoring checks vehicle voltage every 100ms
during start to help diagnose starting system
problems before failure. It also monitors up
to every second for weak battery.
- Serial Ports
can interface to Tire Pressure Monitors, Printers, Fuel
Registers, Passenger Counters, Fare Boxes, Signage,
etc.
- 12 Channel GPS
updates every second and compares speed and heading
changes to determine true course and distance.
The almanac is kept alive via a ten year internal
battery providing acquisition times of less than 15
seconds even after power off.
|
Product
Comparison
Chart |
Communicate - IT
- 802.11b Wirless Lan
allows a second by second vehicle log to be recorded and
transferred to servers at night. This provides a
complete history for review, not a once every three
minute snap-shot like competing systems. Plus,
routes can be loaded on the unit in the morning over the
free WiFi connection instead of the more expensive
cellular modem.
- GPRS or 1xRtt
cellular modems provide real time position information
and vehicle status. The voice channel can be
connected to a push-to-talk hand microphone and external
speaker too. The diver presses one button to call
dispatch, another for 911.
- Orbcomm Satellite
modem can also be used for vehicle location status by
itself, or in conjunction with a cellular modem for rate
shopping.
- Blue Tooth
enables short range communication between the VEU and
existing handhelds or portables and printers in the
vehicle.
|
|
Manage
- IT
- Real Time
Tracking takes place with the units transmitting
their location, speed, heading, direction and engine
information every 1 - 5 minutes depending on the
rate desired by you.
- Complete Daily
History with second by second detail provide
management with full details of route adherence,
driver habits along with vehicle maintenance and
faults.
- Standard
Reports include vehicle stop / start times
including the Latitude Longitude and the actual
addresses. Vehicle maintenance logs with
engine filter status, voltages, tire pressures and
errors. Exception reports for over speed, off
route, and hard driving.
- Custom Reports
tailored to your needs are easily accomplished since
all data is stored in a SQL Database.
|
|
|
|
|
|
